35/70W adjustable HID strong light searchlight, beam distance 1.5KM, portable outdoor hunting spotlight



Application a



Product Detail

Product Tags



Power Output




HID D2S Xenon ( AC type)

Lamp Life

Up to 3,000 hours

Color Temp.(K)


Luminous Flux (Lm)



Max. Beam Range



Operating Current



Battery Type

Panasonic Li-ion battery 149Wh

Light time (hrs.)



External Battery Light Time (DC12~30V)

For long time lighting

Charger Input


Charging Time

5.0 hours

Beam Pattern

Spot to flood 1~15 degrees


L296 × W140 × H154mm

Weight(Light only)

2.5 KG

Military Use

Industrial Use

Economic Use

Military Use

Waterproof plastic case

Industrial Use

Aluminum case

Economic Use

Tool case

  • HID searchlight
  • AC100~240V charger
  • DC 12~30V cigarette lighter power connector
  • Diffusion filter lens
  • Shoulder strap
  • HID searchlight
  • AC100~240V charger
  • DC 12~30V cigarette lighter power connector
  • Diffusion filter lens
  • Shoulder strap
  • HID searchlight
  • AC100~240V charger
  • Shoulder strap

■ The Introduction of products

SL HID Searchlight

   ★. Buit-in Panasonic rechargeable Li-ion battery

   ★. Adjustable focus flood←→spot
   ★. Adjustable HID ballast:
        SL3570: 35W ←→ 70W
   ★. AC100~240V Adapter

   ★. DC12~30V power cable for continuous operation charged and could hold one year.
        a.Using the digital display, the residual power can be clearly displayed
        b.Power adjustable segment display
        c.10 minutes before the battery runs out, flash "Lo" warning
   ★. Wide Angle Diffusion Lens.
   ★. Tripod for holding the search light.
   ★. LED battery management malfunction display.
   ★. Dustproof and waterproof design:IP65
   ★. ON/OFFmain switch: When you turn off the main switch,the searchlight shouldn't be
        Battery power electronic display.

DC12~30V cigarette lighter power connector

   ★. It could connect all kinds of vehicle for lighting.
   ★. It is only for lighting not charging.

AC 100~240V charger

   ★. It could use household socket

Diffusion filters

   ★. Flood filter(white)Widens beam to full flood.
   ★. Ptional red,yellow,blue and green filters.

■ Optional Accessories

Plug-in Li-ion battery pack (AC charger)
   ★. Panasonic Li-ion battery 97Wh or 149Wh
   ★. lighting time:30W:2.4 / 4.2Hrs. , 35W:2.0 / 3.1Hrs. 50W:1.5 / 2.6Hrs. , 70W:1.1/ 1.9Hrs.
        Charge time:5.0 hours
   ★. LED battery capacity indicator

   Red : 20,40% power,battery needs to be charged.

   Green : 60,80,100 power
   ★. Water proof design.
   ★. Attach connecting wire.

AC100~240V Direct for lighting adapter
   ★. INPUT : AC100~240V
        OUTPUT : DC24V5A
   ★. It can cnonect AC for lighting,do not need the Li-ion battery.
   ★. It’s only for lighting, not for charging.

DC12V cigarette lighter charger
   ★. It only use for charge and don’t use for lighting.

3 in 1 auto battery exchanger

   ★. Red:battery ready be discharged.

   ★. Capable of attaching 1~3 Li-ion battery simultaneously.
   ★. Automatically detec the next available battery pack and
        continue to supply power to the searchlight.
   ★. Provide uninterrupted power for up to 9.0 hours.(35W) , 5.4 hours.(70W)
   ★. Attach connecting wire.

3 in 1 auto battery exchanger

Aluminum tripod stand
   ★. Extended to 100cm and fold to 43cm.
   ★. Can set up floodlighting in crime scene when white flood diffuser is fitted.

 Basic color diffusion lens:Red,Yellow,Blue and Green.


 Filter lens 115mm:

‧Infra Red filiters:It could be used in lighting at night.

Finger print and Dust detection lenses: Greatly enhance fingerprint traces and footprint.

Ultraviolet filters:These help identify fingerprints,blood deposits,minerals and counterfeit bank notes.

Protein Filter:It have special wavelehgth to detect human protein,urea,semen DNA and so on.
Main Application : The Police Inapection,Chime Investigation.

■ Operating Features and Instructions for Use


input hole
Main power switch
   ★.If you are not using it, be sure to fully charge the lithium battery,
then turn off the main switch and store it.

   ★.When all the buttons of the search lamp fail to be used,the lithium battery may be protected.
       a.Unprotect the battery immediately by charging it.
       b.After inserting the charger, if the LED charging red light is not bright for more
than 10 seconds, it means that the battery protection board is not unlocked,
and then repeat the two actions of plugging and unplugging the charger or
dialing the main switch until the protection board is unprotected.

The red LED charging light is always on.
   ★.If the battery cannot be recharged and the battery cannot be unprotected,
the battery may be faulty. Please contact the dealer immediately.

External power input hole
   ★. Connect IP: AC110 ~ 240V OP: DC24V5A Adapter Can light but not charge
   ★. Connect IP: AC110 ~ 240V OP: DC19.5V2.5A charger, Can charge but can't light
   ★. Using the vehicle power supply, connect the DC12~30V cigarette lighter power connector,only lighting can not be charged

■Operating Features and Instructions for Use

  1. If the search light is not used, please charge the internal lithium battery and turn off the main switch to store it.
    If it is stored for more than one month without closing the main switch, the internal lithium battery will be powered off due to excessive self-discharge. ( not covered by the warranty).
  2. When the lithium battery is over-discharged and the battery protection board circuit is activated, the LED charging lamp has no action. At this time, an external AC charger is required to charge, and the protection circuit is automatically released.The LED charging lamp will be constantly lit and the red light represents charging. If there is no red light,it means that the protection has not been successfully removed. Please plug in the charger and test it several times.If it has not been released, please return it to the sales office for repair.
  3. Do not continuously turn ON/OFF the switching power supply several times, which will cause the HID system to detect the bad signal and automatically power off protection. Wait a few minutes and then turn it on, or turn the main switch on and off several times to return to normal lighting
  4. Be sure to turn on the main power switch before turning it on or charging.

  • Previous:
  • Next:

  • Write your message here and send it to us